Removal of the 25km/h limit for e-bikes
with Shimano Steps EP6 / EP801 mid-motor
Put an end to the 25 km/h limit for motor support on your e-bike with Shimano drive with the help of this tuning module.
Benefits of making your e-bike faster with this premium module:
- 25 km/h speed limit is completely lifted
- Simple installation by simply plugging in with precisely fitting plugs without tapping into existing cables
- works in every support level
- full support at any speed - no "turbo lag"
- completely invisible installation
- no external power supply by batteries or similar necessary
- the electronics are sealed against splash water, so you can use the tuning in any weather
- can be deactivated/activated via key combination (light-button)
Compatibility:
This module is compatible with the Shimano EP6 / EP6-RS and EP801 e-bike system (DU-EP600/DU-EP801) up to Firmware V4.4.1 and with all displays for the drives mentioned.
Important note: When the tuning is switched on, the e-bike display will only show the real speed up to about 22-25 km/h. At higher values, the speed display is "frozen" so that the same value is always displayed. The total kilometers are also no longer displayed correctly.
The tuning can be activated or deactivated at any time via the light control function of the bike menu or the LIGHT button on the display or handlebar controls. When the light is ON, the tuning is OFF. When the lights are OFF, tuning is ON. Alternatively, it can be connected in such a way that the tuning is activated automatically when the Ebike is switched on.
The tuning automatically calibrates itself to your pedelec when it is switched on. The engine, the display and the tire size are automatically recognized. The tuning can therefore be used universally to make your e-bike faster - you do not have to make any settings manually.
Important:
In order for the tuning to work properly with EP801 and EP6 drives, the ACC connection must be activated! Unfortunately, this is not the case with all models. If the ACC connection cannot be activated, the module can alternatively be connected to the light. The disadvantage of this solution is that in this case activation via the light is not possible, and the light must always be on.
Important:
In order for the tuning to work properly with EP801 and EP6 drives, the ACC connection must be activated! Unfortunately, this is not the case with all models. If the ACC connection cannot be activated, the module can alternatively be connected to the light. The disadvantage of this solution is that in this case activation via the light is not possible, and the light must always be on.
You will of course receive detailed and illustrated installation instructions. So the installation is not a problem.
E-Bike Tuning for Shimano Steps EP6 EP600 EP801 engine
- Product Code:EB-M3-SH-EP6/801
- Availability:4 - 5 days
- 219.00€
-
198.00€
- Ex Tax:165.00€
Related Products
E-Bike Tuning for Shimano Steps E5000 up to E8000 engine
Removal of the 25km/h limit for e-bikeswith Shimano Steps mid-motor(E8000, E7000, E6001, E6002, E601..
159.90€ 189.00€ Ex Tax:133.25€
E-Bike Tuning for Shimano Steps EP8 / EP8RS / EP800 engine
Removal of the 25km/h limit for e-bikeswith Shimano Steps EP8 mid-motorPut an end to the 25 km/h lim..
189.00€ 219.00€ Ex Tax:157.50€